• CSKH: 0942 279 119
  • Hỗ trợ trực tuyến 
Máy chiếu OPTOMA S316
Máy chiếu OPTOMA S316

Máy chiếu OPTOMA S316

Mã sản phẩm: S316 Lượt xem: 388

Mô tả sản phẩm:
Máy chiếu OPTOMA S316

Mô tả chi tiết

Máy chiếu OPTOMA S316
-       Cường độ sáng: 3200 Ansi Lumens
-       Độ tương phản: 15.000:1
-       Độ phân giải thực: SVGA (800 x 600).
-       Độ phân giải nén: UXGA (1600 x 1200) 60Hz
-       Số màu hiển thị: 1,07 tỷ màu
-       Kích thước hình ảnh: 22.9 ~300'
-       Tỷ lệ phóng hình: 1.95~2.15:1
-       Chỉnh vuông hình: ± 40 độ.
-       Loa: 2W
-       Cổng kết nối máy chiếu: HDMI x1; VGA in x 2, VGA out x 1,  S- Video x 1, Compsite Video x 1, Audio Input x 2, Audio output x 1, RS232 control iterface x 1 ( 9 pin ), USB type B x 1
-       Bóng đèn: 190W. 
-       Tuổi thọ bóng đèn: 6500 giờ
-       Chức năng Bluray 3D
-       Kích thước: 31.9 x 22.9 x 8.9 cm.     
-       Trọng lượng: 2.5 kg
BrilliantColor™ allows the usage of a more advanced image processing algorithm and enables the usage of more colors on the color wheel, than the standard Red, Green, Blue and White segments. New BrilliantColor™-II technology enables higher brightness levels by boosting mid-tone colors, resulting in more vibrant, precisely accurate colors projected on the screen.
3D Technology
Using the inherent speed of DLP® technology, S316 can output video and images at an astonishing rate of 144Hz, allowing you to show full screen, full color, stereoscopic 3D. Within DLP® Link™ technology, the 3D glasses synchronise with the image on screen to filter each stream to the correct eye; your brain then combines the two streams to make them jump into life. S316 supports multiple 3D formats f-rom various devices such as PC, Blu-ray 3D™, Sony® PS3, Microsoft® Xbox 360 or 3D TV broadcast system.
High Contrast Ratio
This measurement technique includes a reproducible procedure that can be used to compare the performance of projectors using different display technologies. With an ANSI contrast ratio significantly higher than many LCD based projectors, S316 produces a stunning 15,000:1 contrast ratio for pin sharp, crystal clear images. Crisper whites and ultra rich blacks bring the picture to life.
Quick Resume
The function allows you to turn the power back on instantly. If the projector was turned off within 100 seconds by accident, this function allows the projector to boot up again instantly.
Flexible Installation
S316 put its I/O connections on the side, allows user to place the projector against the wall; it gives more options for installation.
Display Technology Texas Instruments DLP® technology / 0.55” SVGA DMD Chip
Resolution Native: 800×600 (SVGA) Support Computer signal up to UXGA (1600×1200) 60Hz
Brightness (typical) 3,200 ANSI Lumens
Contrast Ratio 15,000 :1
Displayable Colors 1073.4 million colors (10bit)
Projection Lens F=2.41~2.55 ; f = 21.8~23.98 mm; 1.1× manual zoom / focus lens
Image Size 22.9 to 299 inch
Projection Distance 1 ~ 12m
Throw Ratio 1.95 ~ 2.15 :1
Digital Keystone Correction ±40° Vertical
Aspect Ratio 4:3 Native,16:9 Compatible
Scan Rate Horizontal: 15.375 ~ 91.146 KHz; Vertical: 24 ~ 85 Hz (120Hz for 3D feature)
Computer Compatibility UXGA, SXGA+, SXGA, SVGA, VGA Compression, VESA standards, PC & Macintosh compatible
Video Compatibility HDTV (720p, 1080i/p), SDTV (480i/p, 576i/p) Full NTSC, PAL PAL-M, PAL-N, SECAM
Input / Output Connections VGA in ×2
VGA Out ×1
S-Video ×1
Composite Video ×1
Audio Input ×2
Audio output ×1
RS-232 control interface ×1 (9 Pin)
USB Type B ×1
Uniformity 85%
Speaker 2W×1
Lamp Life Maximum 6,500 Hrs (Dynamic mode)
Power Supply Universal AC 100 ~ 240V± 10%, 50/60Hz
Dimensions (W×D×H) 319×229×89 mm
Weight 2.5kg